Machine park, production capabilities
Our well-equipped machine park permits realisation of:
- Various types of purely practical orders using one or several machining processes
- Comprehensive design and production projects including, for example, making control and measurement devices, 2D and 3D gauges and templates, technological equipment for production lines, workshop aids, models, mock-ups, prototypes (including vehicle prototypes), automotive products and accessories.
3- and 5-axis CNC machining
5-axis gantry type machining centre – FC4027 BRAY
Parameters
| Dimension of the work surface | 4000×2700×1480 mm |
| The maximum dimension of the workpiece 3X | 3974×2684×1168 mm |
| The maximum dimension of the workpiece 5X | 3166×2086×1060 mm |
| The total dimension of the machine | 7070×4870×4810 mm |
| The maximum speed in the axis | 60/30/30 m/min |
| Repeatability in the XYZ position | ± 0.01 (± 0.015) mm |
| XYZ positioning accuracy | ± 0.02 (± 0.035) mm/m |
5-axis vertical machining centre – C250 HERMLE
Parameters
| Table dimensions | 450×360 mm |
| Max. table load | 300 kg |
| Maksymalny wymiar obrabianej części 5X | |
| Travel on axis X | 600 mm |
| Travel on axis Y | 550 mm |
| Travel on axis Z | ±450 mm |
| Positioning accuracy | P≤0.008 mm |
5-axis vertical machining centre, REMA CONTROL – Leonard T5 2.5
Parameters
| Table dimensions | 2720×820 mm |
| Rotating table dimensions: Built-in table diameter Rotational range of axis a Max. load of built-in table | 800 mm 360° 3000 kg |
| Dimensions: Travel on axis X Travel on axis Y Travel on axis Z | 2550 mm 1000 mm 1000 mm |
| Positioning accuracy | +/- 0.008 mm |
| Repeatability accuracy | +/- 0.005 mm |
| Rotational range of axis b | +/- 105° |
3-axis vertical machining centre, AKIRA SEIKI – Performa Classic V4A
Parameters
| Table dimensions | 1200×480 mm |
| Max. table load | 1300 kg |
| Dimensions: Travel on axis X Travel on axis Y Travel on axis Z | 1050 mm 540 mm 550 mm |
| Positioning accuracy | +/- 0.01 mm |
| Repeatability accuracy | +/- 0.003 mm |
Pionowe centrum obróbkowe CNC – KOVOSVIT – MCV 750 QUICK
Parameters
| Table dimensions | 1000×500 mm |
| Max. table load | 400 kg |
| Dimensions: Travel on axis X Travel on axis Y Travel on axis Z | 750 mm 500 mm 500 mm |
| Positioning accuracy | +/- 0.003 mm |
| Coordinate setting accuracy | +/- 0.010 mm |
Waterjet cutting
Opal Waterjet 2D cutting machine
Utilisation of waterjet cutting allows work with a wide variety of materials such as: stone, wood, various steel grades, non-ferrous metals, plastics etc.
Cutting is done using water and / or water and abrasive materials.
Parameters
- Dimensions of the table working surface: 1500 x 3000 mm
- Cutting thickness: 0.5 – 150 mm
Electrical discharge machining
Wire cutter (EDM) – MITSUBISHI MV2400S Tubular
Parameters
| Travel on axes XYZ | 600×400×310 mm |
| Max. workpiece dimensions | 1050×820×305 mm |
| Max. workpiece weight | 1500 kg |
| Max. bath fill depth | 305 mm |
| Table dimensions | 840 x 560 mm |
| Max. cut angle | degrees ± 15°/ 260 mm degrees ± 30°/ 110 mm |
| Wire used | 0.10 – 0.30 mm |
| Automatic wire threading for wires of diameter | 0.10 – 0.30 mm |
| Max. weight of wire spool | 10 kg |
Turning
CNC lathe – XYZ SLX 355
Parameters
| Flight over bed | 360 mm |
| Flight over support | 225 mm |
| Bracket travel | 185 mm |
| Distance between centres | 1000 mm |
| Maximum turning length | 900 mm |
| Spindle clearance | 52 mm |
| Spindle end size | D 1-6 camlock |
| Spindle taper | MT4 in sleeve |
| Spindle motor power | 5.75 KW (7.5 HP) |
| Spindle rotation | 50-4000 rpm – 2 scales |
| Tailstock travel | 150 mm |
| Tailstock spindle | MT4 |
| Tailstock diameter | 60 mm |
| Bed width | 300 mm |
| Machine dimensions | 2300×1250×1750 mm |
QTE-300M SG 1000U Lathe – CNC Turning Center of Quick Turn Series
Parameters
| Specification | Bed Length – 1000U mm | |
| Capacity | Maximum Swing | 728 mm |
| Maximum Machining Diameter | 340 mm | |
| Maximum Bar Work Capacity | 80 mm | |
| Main Spindle | Chuck Size | 10 in |
| Maximum Speed | 4000 rpm | |
| Turret (Upper) | Number of Tools | 12 |
| Maximum Speed | 4500 rpm | |
| Feed Axes | Travel (X Axis) | 215 mm |
| Travel (Z Axis) | 1155 mm |
Grinding
Grinder for shaft and openings
Parameters
| Workpiece diameter | 160 mm |
| Max. distance between centres | 320 mm |
| Max. clamp weight of the object being ground | 25 kg |
| Fixing bracket diameter | 100 mm |
Flat surface grinder SGA 3063 AHD
Parameters
| Workpiece dimensions | 305×635×400 mm |
| Table dimensions | 305×635 mm |
| Speed of travel down the table | 7-25 m/min |
| Max. distance from table surface to spindle axis | 580 mm |
| Max. load (including fixing bracket) | 270 kg |
| Automatic intermittent travel | 0.1-8 mm |
| Quick table movement | 990 mm/min |
| Lateral movement of the table performed by means of a knob | 1 mm/rev |
| Grinding disk dimensions | 350×40×127 mm |
| Speed of the grinding wheel | 1450 (50 Hz) 1750 (60 Hz) rev/min |
| Quick vertical movement | 240 mm/min |
| Vertical movement performed by means of a knob | 1 mm/rev |
| Spindle motor power | 5.5 kW |
| Vertical movement motor power | 0.5 kW |
| Traversing motor power | 0.04 kW |
| Workspace dimensions | 2900×2200 mm |
Coordinate grinding machine
Parameters
| Positioning accuracy | 0.003 mm |
| Table fixing area dimensions | 270×540 mm |
| Latitudinal/longitudinal travel | 254/400 mm |
| Max. table load | 150 kg |
| Vertical travel | 340 mm |
Conventional milling
SMX 3500
Parameters
| Travel on axes XYZ | 787×508×584 mm |
| Max. object weight | 600 kg |
| Table dimensions | 1372×355 mm |
| Rotational speed | 50-5000 rev/min |
| Repeatability of positioning | +/- 0.010 mm |
| Resolution of measurement system | 0.005 mm |
SMX 5000
Parameters
| Travel on axes XYZ | 1524×596×584 mm |
| Max. object weight | 850 kg |
| Table dimensions | 1930×355 mm |
| Rotational speed | 50-5000 rev/min |
| Repeatability of positioning | +/- 0.010 mm |
| Resolution of measurement system | 0.005 mm |
Back
to top